Rod ends consist of a hollow top with an integral shank, forming the rod end housing for a spherical plain bearing. They are primarily used at both ends of hydraulic or pneumatic pistons, connecting cylinders to related components.
JOJI offers a wide range of standard rod ends, with rod end housings featuring various thread and shank designs for easy installation. A variety of sliding contact surface combinations make rod ends suitable for a wide range of operating conditions.
Upon request, JOJI can also produce rod ends in the JOJI Explorer steel-on-steel design (designation suffix ESX).
The various standard categories are described on the following pages.
Designs, Series, and Types
Maintenance-Required Rod Ends
Steel-on-Steel
Steel-on-Bronze
Maintenance-Free Rod Ends with Female or Male Thread
+86 13817962999
Aperture d
mm
-
mm
Outer Diameter D
mm
-
mm
Width B
mm
-
mm
Model
| Model | Basic Dimensions | Angle of Tilt | Basic Load Rating | ||||||
| Dynamic | Static | ||||||||
| d[mm] | d2max.[mm] | B[mm] | G6g | C1max.[mm] | h[mm] | α[°] | C[kN] | C0[kN | |
| SAKAC 5 M | 5.0 | 8.0 | 19.0 | M 5 | 7.5 | 33.0 | 13.0 | 3.25 | 4.8 |
| SAKB 5 F | 5.0 | 8.0 | 19.0 | M 5 | 7.5 | 33.0 | 15.0 | 3.25 | 5.3 |
| SALKAC 5 M | 5.0 | 8.0 | 19.0 | M 5 | 7.5 | 33.0 | 13.0 | 3.25 | 4.8 |
| SALKB 5 F | 5.0 | 8.0 | 19.0 | M 5 | 7.5 | 33.0 | 13.0 | 3.25 | 5.3 |
| SA 6 C | 6.0 | 6.0 | 22.0 | M 6 | 4.5 | 36.0 | 13.0 | 3.6 | 8.15 |
| SA 6 E | 6.0 | 6.0 | 22.0 | M 6 | 4.5 | 36.0 | 13.0 | 3.4 | 8.15 |
| SAKAC 6 M | 6.0 | 9.0 | 21.0 | M 6 | 7.5 | 36.0 | 13.0 | 4.3 | 4.8 |
| SAKB 6 F | 6.0 | 9.0 | 21.0 | M 6 | 7.5 | 36.0 | 17.0 | 4.25 | 6.8 |
| SAL 6 C | 6.0 | 6.0 | 22.0 | M 6 | 4.5 | 36.0 | 13.0 | 3.6 | 8.15 |
| SAL 6 E | 6.0 | 6.0 | 22.0 | M 6 | 4.5 | 36.0 | 13.0 | 3.4 | 8.15 |
Copyright © JOJI. All Rights Reserved. Website Maintenance Registration Number: Su ICP No. 2024128229-1
