CN/ EN

SAKAC 6 M

Maintenance required for male rod end bearings

These SKF rod end bearings consist of spherical plain bearings with a steel-to-bronze sliding contact surface combination. These bearings require maintenance and can be supplemented with lubrication through the lubrication holes in the rod ends and shanks for Series 6 and larger. Available with either a left-hand (prefix SAL) or right-hand male thread.

Suitable for applications where insufficient lubrication may occur
Simple and easy to install
Easy to relubricate (sizes ≥ 6)

+86 13817962999

Home > Products > Bear > Sliding bearings > Spherical plain bearings and rod ends > Rod ends > Male thread >

Overview

Technical Parameters

Overview

Skim Through

Dimensions

Bearing inner ring inner diameter	6.0mm
Outer diameter, bearing seat eye	21.0mm
Width, bearing inner ring	9.0mm
Thread type	M 6
Width, bearing housing eye	7.5mm
Centre height of rod holder (from rod shank end face)	36.0mm
Bearing housing height, overall	48.0mm

Performance

Basic rated dynamic load	4.3kN
Basic static load rating	4.8kN

Properties

Sliding contact surface material	Steel to copper
Rod seat hole material	Steel
Inner ring material	Bearing steel
Maintenance	Supplemental Lubrication Required
Attachment features, rod ends	Right-hand male thread
Sealing	without

Logistics

Net weight	0.023kg
eClass Code	23-05-01-05
UNSPSC Code	31171508

Technical Parameters

Size

d	6mm	Hole diameter
_d2	21mm	Top Diameter
B	9mm	Inner ring width
G		Thread
_C1	7.5mm	Top width
h	36mm	Height from the end face of the shank to the centre of the rod end head
α	13°	Tilt angle
_dk	12.7mm	Inner ring raceway diameter
_l1	21mm	Thread length
_l2	48mm	Rod end seat length (height)
_r1	0.3mm	Bore chamfer size

Data Calculation

Basic dynamic load rating	C	4.3kN
Basic static load rating	_C0	4.8kN
Specific dynamic load factor	K	50N/mm²
Material constant	_KM	330