Withdrawal sleeve

Product Introduction
Withdrawal sleeves are used to mount bearings with a tapered bore on cylindrical journals on stepped shafts (fig. 1). The sleeve is pressed into the bore of the bearing inner ring, which in turn presses against a shaft shoulder or similar retaining element. The sleeve can be secured with a nut or end plate. KM or HM locknuts with the appropriate locking mechanism are suitable (locknuts with a keyway are required). Locknuts are not supplied with the sleeve and must be ordered separately. End plates are not manufactured by JOJI.

+86 13817962999

Model Basic Dimensions Related Products
Hydraulic Nut Disassembly Nut
d1[mm] d[mm] B1[mm] B2[mm]
AH 2308 35.0 40.0 40.0 43.0 KM 9
AH 308 35.0 40.0 29.0 32.0 KM 9
AH 2309 40.0 45.0 44.0 47.0 HMV 10E KM 10
AH 309 40.0 45.0 31.0 34.0 HMV 10E KM 10
AHX 2310 45.0 50.0 50.0 53.0 HMV 11E KM 11
AHX 310 45.0 50.0 35.0 38.0 HMV 11E KM 11
AHX 2311 50.0 55.0 54.0 57.0 HMV 12E KM 12
AHX 311 50.0 55.0 37.0 40.0 HMV 12E KM 12
AHX 2312. 55.0 60.0 58.0 61.0 HMV 13E KM 13
AHX 312 55.0 60.0 40.0 43.0 HMV 13E KM 13

Copyright © JOJI. All Rights Reserved. Website Maintenance Registration Number: Su ICP No. 2024128229-1