Size
| Inner Diameter | 35.0mm |
| Width | 40.0mm |
| Thread type | M 45x1.5 |
Properties
| Taper | 1:12 |
| Filling hose | without |
Logistics
| Net weight | 0.13kg |
| eClass Code | 23-11-07-05 |
| UNSPSC Code | 31163218 |
The withdrawal sleeve is a tapered sleeve with a cut-out for mounting a bearing with a tapered bore on the cylindrical journal of a stepped shaft. AH(X) push-off bushings are dimensioned in accordance with ISO standards in a basic mounting and dismounting design. The push-off sleeve is fixed to the shaft by means of a locknut or an end plate. The lock nut and corresponding locking device can be ordered separately. JOJI does not manufacture end plates.
+86 13817962999
Skim Through
| Inner Diameter | 35.0mm |
| Width | 40.0mm |
| Thread type | M 45x1.5 |
| Taper | 1:12 |
| Filling hose | without |
| Net weight | 0.13kg |
| eClass Code | 23-11-07-05 |
| UNSPSC Code | 31163218 |
Technical Parameters
| d1 | 35.0mm | Hole diameter |
| d | 40.0mm | Minimum external cone diameter |
| B1 | 40.0mm | Width |
| B2 | 43.0mm | Width of the pusher sleeve and bearing before the pusher sleeve is pushed into the bearing bore |
| G | M45x1.5 | Thread |
| G1 | 7.0mm | Thread length |
| 1:12 | Surface taper |
Copyright © JOJI. All Rights Reserved. Website Maintenance Registration Number: Su ICP No. 2024128229-1