Size

d	180.0mm	Hole diameter
D	280.0mm	Outer diameter
H	43.0mm	Height
_d1	min.244.0mm	Diameter of the groove of the inner ring's big stopper
C	15.0mm	Width of outer ring (seat)
_H1	29.0mm	Distance
J	194.0mm	Inner ring (shaft/positioning washer) hole pitch circle diameter
_J1	260.0mm	Outer ring (seat) hole pitch circle diameter
N	7.0mm	Inner ring (shaft/positioning washer) through hole
_N1	11.0mm	Oil drain hole for inner ring (shaft collar)
_N2	7.0mm	Outer ring (seat) through hole
a	6.2mm	Inner ring (collar) oil drain hole depth
_r1	0.6mm	Outer ring (seat) chamfer size
_r2	min.0.3mm	Chamfer size

Data calculation

Basic rated radial dynamic load	C	89.7kN
Basic rated radial static load	_C0	236kN
Basic rated axial dynamic load	C	80kN
Basic rated axial static load	_C0	560kN
Allowable speed for grease lubrication		190r/min
Oil-air lubrication permissible speed		380r/min
Axial preload		2.6kN
Axial unloading force		5.6kN
Friction torque	_CRL	13N-m
Preloaded Class A axial stiffness (two bearings in back-to-back or face-to-face configuration)		10.6kN/µm
Preload Class B axial stiffness (two bearings back-to-back or face-to-face configuration)		5.8kN/µm
Torque stiffness		54kN-m/mrad