Size

d	460.0mm	Hole diameter
D	600.0mm	Outer diameter
H	70.0mm	Height
_d1	min.560.0mm	Diameter of the groove of the inner ring's big stopper
C	22.0mm	Outer ring (seat) width
_H1	46.0mm	Distance
J	482.0mm	Inner ring (shaft/positioning washer) hole pitch circle diameter
_J1	580.0mm	Outer ring (seat) hole pitch circle diameter
N	9.3mm	Inner ring (shaft/positioning washer) through hole
_N1	15.0mm	Oil drain hole for inner ring (shaft collar)
_N2	9.N2 3mm	Outer ring (seat) through hole
a	8.2mm	Inner ring (collar) oil drain hole depth
_r1	1.0mm	Outer ring (seat) chamfer size
_r2	min.1.0mm	Chamfer size

Data calculation

Basic rated radial dynamic load	C	201kN
Basic rated radial static load	_C0	765kN
Basic rated axial dynamic load	C	180kN
Basic rated axial static load	_C0	2240kN
Allowable speed for grease lubrication		80r/min
Allowable speed for oil-air lubrication		160r/min
Axial preload		16kN
Axial unloading force		34kN
Friction torque	_CRL	70N-m
Preloaded Class A axial stiffness (two bearings in back-to-back or face-to-face configuration)		38.5kN/µm
Preload B axial stiffness (two bearings in back-to-back or face-to-face configuration)		12.1kN/µm
Torque stiffness		1036kN-m/mrad