Axial spherical plain bearings are able to withstand axial as well as combined radial and axial loads. This specific design includes a lubrication-free steel/PTFE FRP sliding contact surface combination. However, supplementary lubrication can be provided from both sides, thus extending the service life of the bearings.
+86 13817962999
Skim Through
| Inner Diameter | 25.0mm |
| Outer Diameter | 62.0mm |
| Total height | 22.5mm |
| Collar height | 16.5mm |
| Seat height | 16.7mm |
| Basic rated dynamic load | 69.5kN |
| Basic rated static load | 112.0kN |
| Sliding contact surface material | Steel to PTFE FRP |
| Shaft ring material | Bearing steel |
| Seat ring material | Bearing steel |
| Maintenance | Maintenance-free |
| Sealing | Without |
| Relubrication | Without |
| Net weight | 0.372kg |
| eClass Code | 23-05-01-06 |
| UNSPSC Code | 31171515 |
Technical Parameters
| d | 25.0mm | Hole diameter |
| D | 62.0mm | Outer diameter |
| T | 22.5mm | Height |
| α | 4.2° | Tilt angle |
| dk | min.68.0mm | Inner ring raceway diameter (shaft ring spherical diameter) |
| d1 | 58.5mm | Outer diameter of inner ring (shaft collar) |
| D1 | 34.4mm | Bore diameter of outer ring (seat) |
| B | 16.5mm | Height of inner ring (collar) |
| C | 16.7mm | Height of outer ring (seat) |
| r1 | 1.0mm | Chamfer size |
| s | 14.0mm | Distance from the centre of the spherical diameter to the back of the collar (large side of the inner ring) |
| da | min.45.0mm | Shaft shoulder diameter |
| Da | max.47.0mm | Bearing housing shoulder size |
| ra | max.1.0mm | Chamfering radius |
| Basic rated axial dynamic load | C | 69.5kN |
| Basic rated axial static load | C0 | 112kN |
| Specific dynamic load factor | K | 50N/mm² |
| Specific static load factor | K0 | 80N/mm² |
| Material constant | KM | 670 |
Copyright © JOJI. All Rights Reserved. Website Maintenance Registration Number: Su ICP No. 2024128229-1
