Axial spherical plain bearings are able to withstand axial as well as combined radial and axial loads. This specific design includes a lubrication-free steel/PTFE FRP sliding contact surface combination. However, supplementary lubrication can be provided from both sides, thus extending the service life of the bearings.
+86 13817962999
Skim Through
| Inner Diameter | 60.0mm |
| Outer Diameter | 150.0mm |
| Total height | 45.0mm |
| Collar height | 37.0mm |
| Seat height | 34.0mm |
| Basic rated dynamic load | 375.0kN |
| Basic static load rating | 600.0kN |
| Sliding contact surface material | Steel to Teflon FRP |
| Shaft ring material | Bearing steel |
| Seat ring material | Bearing steel |
| Maintenance | Maintenance-free |
| Sealing | Without |
| Relubrication | Without |
| Net weight | 4.4kg |
| eClass Code | 23-05-01-06 |
| UNSPSC Code | 31171515 |
Technical Parameters
| d | 60.0mm | Hole diameter |
| D | 150.0mm | Outer diameter |
| T | 45.0mm | Height |
| α | 5.8° | Tilt angle |
| dk | min.160.0mm | Inner ring raceway diameter (shaft ring spherical diameter) |
| d1 | 140.0mm | Outer diameter of inner ring (shaft collar) |
| D1 | 84.0mm | Outer ring (seat) bore diameter |
| B | 37.0mm | Inner ring (collar) height |
| C | 34.0mm | Height of outer ring (seat) |
| r1 | 1.0mm | Chamfer size |
| s | 35.0mm | Distance from the centre of the spherical diameter to the back of the collar (large side of the inner ring) |
| da | min.109.0mm | Shaft shoulder diameter |
| Da | max.120.0mm | Bearing housing shoulder size |
| ra | max.1.0mm | Chamfering radius |
| Basic rated axial dynamic load | C | 375kN |
| Basic rated axial static load | C0 | 600kN |
| Specific dynamic load factor | K | 50N/mm² |
| Specific static load factor | K0 | 80N/mm² |
| Material constant | KM | 670 |
Copyright © JOJI. All Rights Reserved. Website Maintenance Registration Number: Su ICP No. 2024128229-1
