GAC 60 F

Angular contact spherical plain bearings,\n maintenance-free, metric sizes

Angular contact spherical plain bearings are designed to withstand combined radial and axial loads. Single bearings can withstand axial loads acting in one direction. This particular design includes a lubrication-free steel/PTFE FRP sliding contact surface combination. However, supplementary lubrication can be provided from both sides, thus extending the service life of the bearing.

  • Designed for combined radial and axial loads
  • Separable inner and outer rings for easy mounting
  • Long service life and virtually maintenance-free
  • Relatively insensitive to contamination
  • Low coefficient of friction

+86 13817962999

Overview
Technical Parameters

Overview

Skim Through

Size

Inner Diameter60.0mm
Outer Diameter95.0mm
Inner ring width23.0mm
Outer ring width21.0mm

Performance

Basic rated dynamic load78.0kN
Basic rated static load125.0kN

Properties

Sliding contact surface material Steel to Teflon FRP
Inner ring material Bearing steel
Outer ring material Bearing steel
Maintenance Maintenance-free
Sealing Without
Relubrication Without

Logistics

Net weight0.672kg
eClass Code 23-05-01-06
UNSPSC Code 31171515

Technical Parameters

Technical Parameters

Size

d60.0mm Hole diameter
D95.0mm Outer diameter
T23.0mm Width
α2.6° Tilt angle
dk min.88.5mm Inner ring raceway diameter
B23.0mm Inner ring width
C21.0mm Outer ring width
r11.5mm Chamfer size of bore and large side
r2 min.0.6mm Chamfering dimensions for bore and small side
s5.7mm Distance from the centre of the spherical diameter to the inner ring's major flanks

Shoulder size

da max.68.0mm Shoulder diameter on the small side of the inner ring
db max.77.0mm Shoulder diameter on the large side of the inner ring
Da min.70.0mm Diameter of the housing shoulder on the large side of the outer ring
Db min.90.0mm Shoulder diameter of the housing on the small side of the outer ring
ra max.1.5mm Chamfer radius of shaft and housing

Data calculation

Basic dynamic load rating C 78kN
Basic static load ratingC0 125kN
Specific dynamic load factor K 50N/mm²
Specific static load factorK0 80N/mm²
Material constantKM 480

Copyright © JOJI. All Rights Reserved. Website Maintenance Registration Number: Su ICP No. 2024128229-1