| Basic dynamic load rating | C | 2.03kN |
| Basic static load rating | C0 | 0.765kN |
| Fatigue Load Limit | Pu | 0.032kN |
| Allowable speed for grease lubrication | | 120000r/min |
| Allowable speed of oil and gas lubrication | | 180000r/min |
| Contact angle | α | 15° |
| Ball diameter | Dw | 3.175mm |
| Number of columns | i | 1 |
| Number of steel balls (per bearing) | z | 8 |
| Reference grease quantity (per bearing) | Gref | 0.09cm³ |
| A preload | GA | 7N |
| Preloaded axial stiffness class A (two bearings in back-to-back or face-to-face configuration) | | 8N/µm |
| Class B preload | GB | 13N |
| Preload B axial stiffness (two bearings in back-to-back or face-to-face configuration) | | 10N/µm |
| Class C preload | GC | 25N |
| Preload Class C Axial stiffness (two bearings in back-to-back or face-to-face configuration) | | 13N/µm |
| Class D preload | GD | 50N |
| Preload Grade D Axial stiffness (two bearings in back-to-back or face-to-face configuration) | | 18N/µm |
| Correction factor depends on bearing series and size | f | 1.01 |
| Correction factor depending on contact angle | f1 | 1 |
| Correction factor for preload A. | f2A | 1 |
| Correction factor for preload level B | f2B | 1.02 |
| Correction factor for preload C | f2C | 1.05 |
| Correction factor for preload level D | f2D | 1.09 |
| Correction factor for mixed ceramic bearings | fHC | 1 |
| Calculation factor for equivalent load | f0 | 9.9 |
| Additional factor for equivalent load | | |
