CN/ EN

SCF 30 ES

Maintenance Required, Rectangular Segment Welded Rod Segment Rod End Bearing

These SKF rod end bearings contain spherical plain bearings with a steel-to-steel sliding contact surface combination. The bearings require maintenance and can be supplementally lubricated by means of grease nipples on the rod ends and shanks. Rod ends with welded rods of rectangular cross-section can withstand high static loads.

Suitable for static, alternating or shock loads.
Easy to relubricate
Replaceable bearings

+86 13817962999

Home > Products > Bear > Sliding bearings > Spherical plain bearings and rod ends > Rod ends > Welding rod >

Overview

Technical Parameters

Overview

Skim Through

Dimensions

Bearing inner ring inner diameter	30.0mm
Outer diameter, bearing seat eye	66.5mm
Width, bearing inner ring	22.0mm
Width, housing eye	29.0mm
Rod holder centre height (from rod shank end face)	51.0mm
Bearing housing height, total	85.0mm

Performance

Basic rated dynamic load	62.0kN
Basic static load rating	110.0kN

Properties

Sliding contact surface material	Steel/steel, standard
Rod holder hole material	steel
Inner ring material	Bearing steel
Outer ring material	Bearing steel
Maintenance	Supplementary lubrication required
Attachment features, rod ends	Rectangular section for welding
Seal	without

Logistics

Net product weight	0.825kg
eClass Code	23-05-01-05
UNSPSC Code	31171508

Technical Parameters

Size

d	30mm	Hole diameter
_d2	66.5mm	Top Diameter
B	22mm	Inner ring width
_C1	29mm	Top width
_h2	51mm	Height from the end face of the shank to the centre of the rod end head
α	6°	Tilt angle
_dk	40.7mm	Inner ring raceway diameter
_l6	85mm	Rod end seat length (height)
_r1	0.6mm	Bore chamfer size

Data Calculation

Basic dynamic load rating	C	62kN
Basic static load rating	_C0	110kN
Specific dynamic load factor	K	100N/mm²
Material constant	_KM	330