For bearings, in many occasions may be used, and to a large extent will be used in the environment of the more severe places, the use of time is longer, maintenance cycle is also longer. So how to carry out maintenance has become a need to focus on the subject of research. As a steel structure of the bearing, once the phenomenon of rust, will affect the service life of the bearing, so we should try to avoid bearing contact with water.

If the bearing is applied to some of the more severe bad environment, it is for the erosion of water is inevitable, so the basic method of waterproofing for steel is to apply a layer of rust preventive oil, a layer of rust preventive oil evenly coated on top of the bearings or this is placed in the rust grease for soaking, so that the surface of the surface of a layer of adsorption of rust preventive oil, and can be determined through the control of the temperature of the grease thickness of the grease.

There is another way is to use rust detergent to clean the non-standard bearings, and then use a dry cloth to wipe the surface of the bearings after cleaning, use a brush dipped in detergent to uniformly wash and brush on it can be. Secondly, you can also use the chemical washing method, the use of a chemical agent to remove the rust, and then put the bearing in the chemical agent inside the soaking, to be cleaned up after the rust will be taken out and wiped clean on it.

Want to avoid the occurrence of bearing corrosion there are many ways, according to the different environments in which the bearings are used, its cleaning methods are also different, choose the cleaning method suitable for the environment to easily remove rust. It should also be noted that the bearing should be avoided in the strong acid, strong alkali environment.